[an error occurred while processing this directive]

Plantation Shutters Logo

Call Toll Free 1-800-823-6677

[an error occurred while processing this directive]

Curved, Angled, Sunburst Wood Shutters


Sunburst Shutters

Fan tops are offered in a 3-1/2" tapered louver that freely rotates 360 degrees. Fan tops must be a perfect radius with the height being equal to the radius plus the width of the bottom rail. (i.e., if the width is 50" then the height would be 26-1/2" which is the radius of 25" plus the standard bottom rail width of 1-1/2".)

See chart below for rail sizes. Bottom louvers will spoke into bottom rail and will be fixed open or closed .

Drawing

Create a Template

Rail Sizes for Fan Tops

Width

Top Rail

Bottom Rail
24" thru 60"
2"
1-1/2"
60+" thru 72"
2-1/2"
1-3/4"
72+" thru 96"
3"
2"

Multiple Radius Fan Tops - Includes openings with vertical sides; more than one radius (ellipse - shown right); and eyebrow shaped. All louvers will be fixed closed (radiate to right or fixed open flush with rail (radiate to center). Please specify. Create a Template

Inside Mounts - Recommended only if arch is a perfect radius.
 


Curved Arches

 

Back


Moveable Louvers in Slant or Arch area

Louvers are moveable only when angle is 65"+ or less.
Range of movement depends on angle. Cut tilt bar and off-center tilt bar available.

Drawing


Fixed Louvers in Slant or Arch Area

Maximum fixed open for 1-1/4" louvers
70"+ down from vertical

Maximum fixed open for 2-1/2" louvers
95"+ down from vertical

Maximum fixed open for 3-1/2" louvers
120"+ down from vertical

Maximum fixed open for 4-1/2" louvers
130"+ down from vertical

Maximum fixed open for 5-1/2" louvers
135"+ down from vertical

90"+ is straight out

Drawing

 


Call 1-800-823-6677 to speak with a knowledgeable Shutter and Blind Specialist.